Approval of permanent joining

To fulfill the requirements of standards, directives, national legislations or specific customer specifications, the personnel and procedures for permanent joining frequently need to be approved by a notified body, recognized third party body or accredited certification body.

Approval of permanent joining personnel procedures for welding

DEKRA provides services according to the following standards and codes. If you don’t find what you are looking for, simply get in touch and we will be pleased to help you.

  • EN 287-1 Qualification testing of welders: Fusion welding - Part 1: Steels
  • EN ISO 9606-1 Qualification testing of welders: Fusion welding - Part 1: Steels
  • EN ISO 9606-2 Qualification testing of welders: Fusion welding - Part 2: Aluminum and aluminum alloys
  • EN ISO 9606-3 Approval testing of welders: Fusion welding - Part 3: Copper and copper alloys
  • EN ISO 9606-4 Approval testing of welders: Fusion welding - Part 4: Nickel and nickel alloys
  • EN ISO 9606-5 Approval testing of welders: Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys
  • EN ISO 14732 Welding personnel: Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials
  • EN ISO 13585 Brazing: Qualification testing of brazers and brazing operators

  • EN ISO 15610 Specification and qualification of welding procedures for metallic materials - qualification based on tested welding consumables
  • EN ISO 15611 Specification and qualification of welding procedures for metallic materials - qualification based on previous welding experience
  • EN ISO 15612 Specification and qualification of welding procedures for metallic materials - qualification by adoption of a standard welding procedure
  • EN ISO 15613 Specification and qualification of welding procedures for metallic materials - qualification based on pre-production welding test
  • EN ISO 15614-1 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys
  • EN ISO 15614-2 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminum and its alloys
  • EN ISO 15614-3 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 3: Fusion welding of non-alloyed and low-alloyed cast irons
  • EN ISO 15614-4 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminum castings
  • EN ISO 15614-5 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys
  • EN ISO 15614-6 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 6: Arc and gas welding of copper and its alloys
  • EN ISO 15614-7 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 7: Overlay welding
  • EN ISO 15614-8 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 8: Welding of tubes to tube-plate joints
  • EN ISO 15614-11 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding
  • EN ISO 15614-12 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding
  • EN 13134 Brazing - Procedure approval
  • EN ISO 14555 Welding - Arc stud welding of metallic materials

  • Pressure Equipment Directive (PED)
  • AD 2000-Merkblatt
  • ASME section IX
  • NORSOK M-101
  • NORSOK M-601
  • EN 1090-2 Execution of steel structures and aluminum structures - Part 2: Technical requirements for steel structures
  • Specific customer requirements

Global partner – DEKRA is located in many countries around the globe

Customer focus – DEKRA always provides services with the best outcome for our customers

Experience – DEKRA has extensive proven experience in delivering services of this kind

Flexible – DEKRA works flexibly to meet individual customer needs

Combination of services – The ability to combine our services for permanent joining and non-destructive testing (NDT) makes DEKRA the only partner you need to successfully complete the approval process

Share page